Rapid expander, standard (Leone)

Mandibular anatomical three directional...

Three directional anatomical screw with two activation points for lower arch, mandubular. Expansion: forward - 2,5 / left and right - 4 mm.(2 mm each side). Body width 13 mm.

Rapid molar distalizer "First Class"

Leone First Class is the perfect appliance to get a rapid controlled distalization of the upper molars. The bicuspid tube is a little higher to compensate the non perfect alignment of molars that may be found in some patients. One turn a day activation produces a distal movement of 0,1 mm sufficient to get molar distalization with a minimum loss of...

Rapid molar distalizer "Fast Back"

Fast Back is a device for the distalization of upper molars, developed through the cooperation of Dr. C. Lanteri and Mr. F. Francolini. The device provides a translation movement of the molars using a pre-determined amount of pressure.  The principle of the distalization process is based on the compression of a MEMORIA® coil spring, available either in...

Rapid expander with telescopic guides

Available in three expansion sizes - 7, 10 and 12 mm. The innovative telescopic guides assure a constant friction throughout the expansion movement, a perfect stability and small sizes. It self deactivates when maximum expansion capacity has been achieved preventing from overtreatment.

Baby RPE expansion screw - 11 mm

Developed with the assistance and clinical experience of Prof. Nicola Veltri, the RPE baby expansion screw is intended for the rapid expansion of the palate suture. The model with 4 arms may be an alternative to the expander A0620. Supplied with a swivel key with handle to facilitate the endoral activation.

Baby RPE expansion screw, 2 arms - 11 mm

Maximum expansion - 11 mm, complete body width - 16 mm, one full rotation with the key ensures 0,8 mm expansion. Developed with the assistance and clinical experience of Prof. Nicola Veltri, the RPE baby expansion screw is intended for the rapid expansion of the palate suture with 2 arms. Supplied with a swivel key with handle to facilitate the endoral...

Connector for expanders - 1 pc

The connector’s flanges ensure a good joint to the band by means of a welding machine. The connector’s shape enables a correct biomechanical position of the arm and the hygiene of the area.

Arm bending instrument for expanders

It allows for easy bending once inserted into the expander's arms.

Arm bending instrument for "Fast Back"

Arm bending instrument for molar distalizer Fast Back. It facilitates the job of the technician during the construction of the device. It allows to maintain the linearity of the arm which has to slide on the palatal tube. The anodised aluminium handle joined to the tempered steel tube assures a firm grip to get accurate bends.

Paralleling device for First Class...

Specific device for the visualization and the maintenance of a parallel position between the vestibular screw and the lingual bar during soldering.

Expansion swivel key - 1 pc.

Key for screw activation.

Swivel key with turn activation counter

The new A0558-01 key is characterized by a “click” after each activation turn which can be heard by the user to control the activation turns of the expander in the oral cavity. A counter on the rear part of the handle enables the easy activation turn control by the patient.

Anti snoring device M.A.D, two screws and...

These intraoral nighttime appliances can treat snoring by acting directly on the cause by pushing the lower jaw forward. In fact, mandibular repositioning pushes tongue forward and keeps epiglottis separated from uvula, thus solving the vibration of the soft tissues of the palate to the passage of air which creates the snoring sound.

Palatal Leaf self-activated expander -...

This new expander features a small size body, and it is equipped with two Nickel Titanium MEMORIA® leaf springs allowing the release of calibrated and continuous forces to promote the expansion of the maxillary arch. Available for order in two expansion sizes - 6 and 9 mm.

Palatal Leaf expander, self-activated -...

This new expander features a small size body, and it is equipped with two Nickel Titanium MEMORIA® leaf springs allowing the release of calibrated and continuous forces to promote the expansion of the maxillary arch. Available for order in two expansion sizes - 6 and 9 mm, by force of 900 g.

CAD CAM 3D rapid expander, reinforced 4...

Rapid expander optimized for construction with CAD-CAM procedure. Available in several sizes for expansion. Patient instructions to facilitate endoral activation at home. Plus a .stl file available on the Leone website and included in the 3D Leone Designer software library.STL file

Anatomical expansion screw CAD CAM 3D frame

It is device optimized for the CAD-CAM procedure: instead of the arms, features 2 squared slots that allow a correct oriented coupling for the welding of digitally designed customized laser melted framework. Available in three expansion dimensions - 8, 10 and 12 mm. STL FILE

Expander screw standard for CAD-CAM 3D

Available in 4 expansion sizes - 8; 9; 11 and 13 mm. Instead of the arms, it has four transversal housings with an ending stop on the bodies that allow a perfect oriented coupling with the digitally designed and SLM manufactured framework. STL File

Expansion screw mandibular CAD-CAM 3D

Available for order in 2 expansion sizes - 8 and 11 mm. The CAD-CAM expander for lower arch Tooth Borne is the optimized CADCAM version of the Torko lower screw. Instead of the arms, it has two transversal housings with an ending stop on the bodies that allow a perfect oriented coupling with the digitally designed and SLM manufactured framework, thus...

Mini implant Integral Biphasic for TADs -...

Mini implants Ø 2 mm with an internal thread in the head for a fixing screw. Available in 4 length sizes. To fabricate a maxillary expander appliance TAD with a temporary skeletal anchorage in two steps.

Spherical cap Fast Back (expander) - 10 pcs.

Micro expander for CAD-CAM framework...

Available in three expansion sizes - 8 ; 11 and 13 mm. This is optimized CAD-CAM expander.  Perfect oriented coupling with the digitally designed and SLM manufactured framework, thus assuring an optimal laser welding process.

Expander screw for unilateral...

Intended for unilateral distalization and expansion of upper molars. Available with 3 or 4 arms. Featuring one guide only and expansion capacity up to 11 mm.

Leaf expander with screw for CAD-CAM

Leaf expander with screw - available in two expansion sizes - 6 and 9 mm. As well as in two levels of applied force - 450 and 900 grams. Body designed for frame production using 3D Leone Designer software.

Leaf self activated expander for CAD-CAM

Self-activating leaf expander with two expansion sizes - 6 and 9 mm. Also in two levels of applied force - 450 and 900 grams.