Rotary instruments of highest quality.
Rotary carbide, diamond and stainless steel burs and cutters. Polishers from silicone and diamond.
Sintered diamond with organic bonder, for grinding of ceramics and metals, enables rough trimming without heat build - up in the restoration. Suitable for rough trimming and pressable porcelain sprues.
Hurry Up Only 6 Items left items
Available for order in 3 abrasives. 3-step diamond-polishing system for working on all types of ceramic ZrO2 without heat generation. A new binding component as well as the diamonds allow for optimum polishing results, achieved without any polishing paste. Mounted with mandrel.
Available for order in 3 abrasives. 3-step diamond-polishing system for working on all types of ceramic ZrO2 without heat generation. A new binding component as well as the diamonds allow for optimum polishing results, achieved without any polishing paste. Mounted with mandrel.
Diamond disc for separating crowns and bridges from HiP ZrO2 framework. Diameter - 10 mm, recommended speed 20 000 rpm. Mounted with mandrel.
Hurry Up Only 9 Items left items
Adjustments to the palatal and lingual aspects of the denture are completed quickly without using tungsten carbide cutters. Polishers with maximum service life. Available in two abrasive steps - coarse and medium.
Minimally invasive excavation using the C1SDR tungsten carbide bur, removes only soft, carious dentine. Orange ring. Available for order in three sizes - 014; 016; 018. For contra angle RA.
The specially developed tungsten carbide instruments provide a real alternative to curette preparation. The instruments enable root smoothing while preserving the tooth structure with visibly less groove formation than when using a curette. Contra angle shank.
Hurry Up Only 4 Items left items
Fine turbine bur for finishing, round end cylinder with 12 cutting edges. Recommended speed: 300 000 rpm.
Hurry Up Only 6 Items left items
Tungsten carbide finishing bur, red ring, long pear for turbine.
Hurry Up Only 8 Items left items
Fine turbine bur for finishing, round end cone with 12 cutting edges. Recommended speed: 300 000 rpm.
At the moment Only 11 Items left items
Exposing and removing impacted wisdom teeth, apicectomies, preparation of bone structure and a bone lid, separating teeth and tooth roots. FGXL shank for turbine,
At the moment Only 14 Items left items
Tungsten carbide finisher with shank length FGXL (overall length 30 mm), for surgical peri-implantitis treatment. Used for removal of micro and macro structures on titanium implants as well as smoothing the surface, thus impeding the formation of new plaque.
Hurry Up Only 2 Items left items
Fine round end taper diamond bur in two sizes - 018 and 023, red fine abrasive.
Matrixs, interdental strips, wedges and etc.
Diamond perforated finishing strip with serrated edge, covered on one side with diamond sand, autoclavable. Available in two abrasives to order - fine (red - 30 μm) and super fine (yellow - 15 μm).
Polishing, rubbers, brushes and pastes
For removing excess material after crown, bridges, veneers and other cementation procedures. Polishing and finishing of interproximal fillings. Reducing interproximal enamel during orthodontic procedures.
Hurry Up Only 3 Items left items
Polishing, rubbers, brushes and pastes
User friendly, ergonomic handle with special grip for better control. The click-plug system allows easier attachement and replacement of the strip.
Hurry Up Only 2 Items left items
Polishing, rubbers, brushes and pastes
Available in three barsive grit sizes - super fine (yellow), fine (red) and medium (blue). For removing excess material after crown, bridges, veneers and other cementation procedures. Polishing and finishing of interproximal fillings. Reducing interproximal enamel during orthodontic procedures.
The special porcelain of the working section separates the tissue and reduces bleeding (coagulation). Reduced heat build-up prevents necroses during treatment. The high stability of the Soft Tissue Trimmer allows rapid, safe gingival preparation.
Hurry Up Only 4 Items left items
The special porcelain of the working section separates the tissue and reduces bleeding (coagulation). Reduced heat build-up prevents necroses during treatment. The high stability of the Soft Tissue Trimmer allows rapid, safe gingival preparation.
Hurry Up Only 7 Items left items
Available in three steps - abrasives. Diamond grit with a highly condensed, long-mesh synthetic bonder, produce an outstanding surface texture. Finish, smooth and high-lustre polish without using polishing paste or needing an extra glaze firing. Specifically developed for gently polishing porcelain and all-ceramic restorations (zirconia). For handpiece and micromotor.
In superfine and fine diamond grit for ceramics, composites and acrylics. The spiral cut enables effortless permanent removal of residue for contouring and separating of saw-cut models.
Hurry Up Only 10 Items left items
Carborundum stones and steel burs
Specially developed for preparing high-performance zirconia with very high degrees of hardness for gentle material reduction. Optimum speed 10,000 – 12,000 rpm.
Hurry Up Only 4 Items left items
Diamond-coated rim completely impregnated with natural diamonds.Special bonding ensures optimum cutting. Multilayered diamond coating for grinding edges and large areas. High removal and cutting capacity.Prepare without striations. Flexible, highly stable disc. Long service life. Max speed: 15 000 rpm.
Carborundum stones and steel burs
Specially developed for preparing high-performance zirconia with very high degrees of hardness for gentle material reduction. Optimum speed 10,000 – 12,000 rpm.
Hurry Up Only 2 Items left items
Carborundum stones and steel burs
Specially developed for preparing high-performance zirconia with very high degrees of hardness for gentle material reduction. Optimum speed 10,000 – 12,000 rpm.
Hurry Up Only 6 Items left items
Adjustments to the palatal and lingual aspects of the denture are completed quickly without using tungsten carbide cutters. Polishers with maximum service life. Available in two abrasive steps. For Straight handpiece. Recommended: 10 – 15 000 min⁻¹.
Mounted polishing rubber suitable for polishing of denture and orthodontic acrylics. For handpiece (micromotor). Recommended speed: 5 - 7 000 min⁻¹.
At the moment Only 18 Items left items
In fine and standard diamond grit, fine for separating and contouring, standard for pre-cutting,separating and contouring of ceramics.
Hurry Up Only 5 Items left items
In superfine, fine and standard diamond grit, for fine and pre-separating and contouring of ceramics. Max speed: 15 000 min⁻¹. For handpiece or micromotor.
Carborundum stones and steel burs
Mounted silicone-carbide abrasive with ceramic bond for universal grinding of ceramics and ZrO₂. Recommended: 10 – 15 000 min⁻¹. For handpieces and micromotors.
At the moment Only 19 Items left items
Carborundum stones and steel burs
Mounted silicone-carbide abrasive with ceramic bond for universal grinding of metal alloys and ZrO₂. Recommended: 10 – 15 000 min⁻¹. For handpieces and micromotors.
At the moment OVER 20 Items left items
Carborundum stones and steel burs
Green silicone-carbide abrasives with ceramic bond for universal grinding of ceramic materials and ZrO₂. For hanpiece and micromotors.
At the moment OVER 30 Items left items
Carborundum stones and steel burs
Abrasive for handpiece and micromotor for fine grinding on ceramic materials and ZrO₂.
At the moment OVER 30 Items left items
For micromotor and straight handpiece.
Hurry Up Only 4 Items left items
For micromotor or straight handpiece.
