We help you
sharing smiles!
tel: (+359)52 601648
tel: 02 9526645
Our webstore uses cookies to offer a better user experience and navigation. Please accept our policy for using our website or read carefully the cookies use on our site and the personal data protection section.
Mounted disc for separating and contouring of ceramics. For use with straight handpiece. Maximum speed: 15 000 min⁻¹.
The key to a perfect punch on a high tear tolerance Sanctuary Dental Dam is a hardened sharp edge on the punch. At Sanctuary, the Stainless Steel 304 is a grade put through a special “work-hardened” process in order to hardened the 304 grade further.
The feldspar veneering material VITA VM 13 is for all standard alloys in the CTE range of 13.8 - 15.2. The main goal was to lower the firing temperature sufficiently to enable the use of high-gold content alloys as well as other alloy types, e.g. reduced gold content bonding alloys, palladium-based alloys or non-precious metal alloys.
Useage with water cooling, for fg turbine. Optimal speed: 200 000 min⁻¹.
Available in two options - for contra angle or for turbine. Max speed: Turbine FG: 15 000 min⁻¹ ; Contra angle: 7 000 min⁻¹.
Mounted polishing rubber suitable for polishing of denture and orthodontic acrylics. For handpiece (micromotor). Recommended speed: 5 - 7 000 min⁻¹.
Mounted silicone-carbide abrasive with ceramic bond for universal grinding of metal alloys and ZrO₂.
It is an Orange oil based Gutta Percha solvent used for removing guta percha at the time of Re-root canal treatment. It is non-hazardous as it is extracted from naturally existing substances which are considered as non-carcenogenic.
Exposing and removing impacted wisdom teeth, apicectomies, preparation of bone structure and a bone lid, separating teeth and tooth roots. FGXL shank for turbine,
With non-stick handling, the radiopaque light cured, condensable and low-shrinkage composite, LUNA 2 offers polishability and strength on an unprecedented scale for anterior and posterior restorations alike. Available in different shades.
Mounted polishing rubber suitable for polishing of denture and orthodontic acrylics. For handpiece (micromotor). Recommended speed: 10 - 15 000 min⁻¹.
Jet 2000 is a phosphatebonded, graphite-free precision investment. It was specially developed for the speed cast technique and is suitable for casting all types of dental alloy. Could be placed in furnace, preheated up to 1050 ° C. Jet 2000 should be used with SILADENT Expansion liquid, type 100!
Set dental dam sheets with forceps, punch pliers, clamps 9 pcs with organizer, frame and sheets 6" x 6" inches. Includes also video cd with instructions.
Available in three barsive grit sizes - super fine (yellow), fine (red) and medium (blue). For removing excess material after crown, bridges, veneers and other cementation procedures. Polishing and finishing of interproximal fillings. Reducing interproximal enamel during orthodontic procedures.
With non-stick handling, the radiopaque light cured, condensable and low-shrinkage composite, LUNA 2 offers polishability and strength on an unprecedented scale for anterior and posterior restorations alike. Available in different shades.
Tungsten carbide finisher with shank length FGXL (overall length 30 mm), for surgical peri-implantitistreatment. Used for removal of micro and macro structures on titanium implants as well as smoothing thesurface, thus impeding the formation of new plaque.
Available in two diamond abrasives - super fine yellow and medium blue. Superfine for very finely separating, fine and standard for initially separating and contouring porcelain. For handpiece (micromotor).
Mounted for Handpiece. Fine grit of TC-bonded diamonds ensures smooth cutting properties, therefore, hardly any rework is necessary and the ceramic surface remains undamaged. Cone-shaped instruments permanently retain shapes edges and are, therefore, perfectly suitable for fissure and structure creation.
Abrasive for handpiece and micromotor for fine grinding on ceramic materials and ZrO₂.
Mounted for Handpiece highly economical, safe and efficient instrument. The special diamond-impregnated metal bond continuously releases diamond particles and therefore permanently ensures sharp cutting properties. Shafts are made of a special steel which allows vibration-free handling. Utilisation on NP, chrome-cobalt, and titanium alloys-and precious...
Fluoride releasing, single component dentin/enamel total etch adhesive -can be used as desensitiser -high bond strength -easy to use - bonds to moist and dry tooth surfaces -complete and consistent hybridisation -non Bis-phenol A -5 ml. bottles
Also for all-ceramic crowns. Using water cooling, for FG Turbine. Optimal speed: 200 000 min⁻¹.
Adjustments to the palatal and lingual aspects of the denture are completed quickly without using tungsten carbide cutters. Polishers with maximum service life. Available in two abrasive steps - coarse and medium.
The special porcelain of the working section separates the tissue and reduces bleeding (coagulation). Reduced heat build-up prevents necroses during treatment. The high stability of the Soft Tissue Trimmer allows rapid, safe gingival preparation.
Mounted for Handpiece highly economical, safe and efficient instrument. The special diamond-impregnated metal bond continuously releases diamond particles and therefore permanently ensures sharp cutting properties. Shafts are made of a special steel which allows vibration-free handling. Utilisation on NP, chrome-cobalt, and titanium alloys-and precious...
Fast in-office tooth whitening system -35 % hydrogen peroxide -available in 1 and 3 patient kit
Fine turbine bur for finishing, round end cone with 12 cutting edges. Recommended speed: 300 000 rpm.
Mounted silicone-carbide abrasive with ceramic bond for universal grinding of metal alloys and ZrO₂. Recommended: 10 – 15 000 min⁻¹. For handpieces and micromotors.
Heat-curing denture base resin for total dentures, partial dentures and orthodontic appliances. Powder - 500 g. It has to be mixed with Liquid for heat-curing denture base resin Superacryl Plus, powder. Available in different colours.
Super micro screw for mandibula. Maximum expansion - 6 mm, body length 11 mm.
Three directional anatomical screw with three activation points (left, right, forward). Available in two expansion ranges - 3 and 4 mm (all directions). respectively the width of the body is 14 and 16 mm.
It allows for easy bending once inserted into the expander's arms.
Specific device for the visualization and the maintenance of a parallel position between the vestibular screw and the lingual bar during soldering.
For full and partial dentures. Resin Ordinary Cure 20 Minutes Process.
Organizer with 3 mucosa punch for implants with gingival heights measure. Three diameter sizes 3,3/4,1/4,8 mm.
Absorbable syntetic polyglactin 910 PGLA suture with surgical needle 3/8 circle 18 mm reverse cutting. Available for order in three sizes of the suture - 3/0; 4/0 and 5/0 USP.
Surgical suture, braided and non-absorbable with circle round-bodied needle 17 mm in three USP sizes - 3/0; 4/0 and 5/0.
Designed to mark the cortical bone for the subsequent drills. Diameter Ø1,9 mm, length 34 mm.
Surgical needle 3/8 circle 15 mm round bodied with non absorbable monofilament propylen suture. Available for order in four diameters - 3/0; 4/0; 5/0 and 6/0 USP.
Made of stainless steel. Allows to extend the total length of the drill. Supplied non-sterile, sterilise in autoclave before use.
MAde of two layers - Cellulose and PE foil. Pack of 125 pieces.
Square plates with hardnes 78 shore, made out of PET G (Polyethylene Terephthalate modified with Glycol) - available in 5 thickness sizes - 0,5; 0,8; 1,0; 1,5 and 2,0 mm. Ideal for thermoforming of dental aligners and post-treatment aesthetic retainers. The material conforms to ISO 10993-1, and once formed, it features excellent optical transparency, with...
The glass ionomer restorative with true aesthetics Available in different shades, as well as two types of viscosity capsule - 0,13 ml.
Take home advanced tooth whitening system -Fluoride releasing -Available in 10%, 16% and (22% - temporary out of production) carbamide peroxide -Neutral pH and desensitising additives -Stays in place - high viscosity -Pleasing spearmint flavoured gel Tips for the syringes included. This product is sold only to dentists. Make your appointment with your...
Compresses made of gauze, sterile version, are made of bleached cotton gauze by chlorine-free method. For full work comfort and for ensuring the safety of use, the edges of the compresses are folded in (ES type folding). This solution protects against loosening of loose threads.
Available in wide range of sizes: 6.0 up to 9.0 for best match. Pre-powdered with corn starch gloves. After putting on, remove excess powder using an aseptic and effective method. The gloves are slightly-textured.
Three-layered acrylic teeth for dentures. Available in 16 Vita* shades with 16 anterior forms combined with 10 lower anterior sizes and 6 posterior sizes. Please see the schema for the possible order combinations. Your notes and wishes regarding posterior size and lower anterior size please inscribe in tab "Product customization" below.
Economical non-gamma 2 admix alloy. Available in different spill quantity and setting times. Silver - 40%.
Cut from pure surgical latex tubing and available in 5 diametric sizes and 3 elasticity forces - light, medium and strong. All packages indicate the diameter size and the elastic pull which comes into force when the elastic is stretched three times its diameter. On each bag a colored image is printed, for an immediate identification from young patients.
For rinsing of root canals and gingival pockets - (0,3 x 25 mm).
Available in two sizes - small and large. Your notes regarding color please inscribe in the "Product customisation" filed from the tabs below the product. The holder has special place for swivel key and patient's phone number.
Made of one ply of cellulose weight 28gr/m² + Pe foil 7 microns
Resin modified glass ionomer luting cement capsule - 0,19 ml.
Non sterile Gauze swabs made of 17 threads and 8 layers.
Available in 4 sizes. High bending strength of 1.678 MPa (EN ISO 178).
Surgical suture, braided and non-absorbable with circle round-bodied needle 17 mm in three USP sizes - 3/0; 4/0 and 5/0.
Available in 5 sizesand two colors for best match. Powder-free, blue nitrile examination gloves, textured at fingers, non-sterile, disposable, 100 pieces.
Tough, strong, packable glass ionomer restorative in high viscosity. Available in different shades. Capsule - 0,12 ml. (HV). Mixing time 10 seconds. Working time - 1'min30" sec. Initial setting time - 3 min. Total 5 min with mixing and work.
Superior reflection reffering to sharpness, natural colors and lightness.
High silver (56%) non-gamma 2 admix alloy. Available in different spill quantity.
Intraoral anti-snoring device M.A.D
➢ The Forwardi intraoral device treats snoring by acting directly on the cause by pushing the lower jaw forward.
➢ Moving the lower jaw pushes the tongue forward and keeps the epiglottis separate from the uvula, thus avoiding the vibration of the soft tissues of the palate from the passage of air, which creates the sound of snoring.
➢ For more details visit us on Facebook.
Ключът към перфектния перфоратор на Sanctuary Dental Dam с висока устойчивост на пробиване е закаленият му остър ръб. Оценен с 5 звезди от Dental Advisor! pic.twitter.com/3H269LwlFW
— МИПИС (@MIPIS_Ltd) July 6, 2023