Tungsten Carbide cutters
This category includes - hartmetall cutters for resin, metal and plaster.

Tungsten Carbide cutters 

There are 93 products.
per page
Add to cart
Add to Compare

3,20 €
6,26 лв.
in stock
Out of stock
Add to Compare

Red plain and fine cut, for acrylics and metals.

6,14 €
12,00 лв.
Out of stock
Out of stock
Add to Compare

They are used for processing soft thermoplastic structures of varying degrees of hardness, providing an even and smooth polished surface.

6,14 €
12,00 лв.
Out of stock
Out of stock
Add to Compare

Used for the finishing of precious metal alloys, chromium-nickel alloys, steel, as well as for fast rough processing of ceramics, shaping and contouring.

6,14 €
12,00 лв.
Out of stock
Add to Compare

Tungsten carbide cross cut available for order in three abrasives - fine (red), medium (blue) and coarse (green).

6,14 €
12,00 лв.
Check Options
Out of stock
Add to Compare

Used for processing soft thermoplastic structures of varying degrees hardness. Providing an even and smooth surface. Coarse cut.

6,14 €
12,00 лв.
Out of stock
Add to Compare

Available for order in medium abrasive - blue. They are used for fast processing of chrome-cobalt, chrome-nickel and other types of alloys. They have high wear resistance.

6,14 €
12,00 лв.
Check Options
Add to Compare

Available for order in two abrasives - fine (red) and medium (blue). For Micromotor and straight handpiece. Recomenden speed: 5000 - 40000 rpm.

6,14 €
12,00 лв.
Check Options
Add to Compare

Cutter with cross cut available for order in different abrasives. Big sharped flame.

6,14 €
12,00 лв.
Check Options
Add to Compare

Narrow cylinder with cross cut available in different abrasives. Recommended speed: 5000 - 40 000 rpm.

6,14 €
12,00 лв.
Check Options
Out of stock
Add to Compare

Fine cross cut carbide cutter used for the finishing of precious metal alloys, chromium-nickel alloys, steel, as well as for fast rough processing of ceramics, shaping and contouring.

6,14 €
12,00 лв.
Out of stock
Out of stock
Add to Compare

Tungsten carbide cutter , cross cut used for fast processing of chrome-cobalt, chrome-nickel and other types of alloys. They have high wear resistance.

6,14 €
12,00 лв.
Out of stock
Out of stock
Add to Compare

Used for processing soft thermoplastic structures of varying degrees hardness. Providing an even and smooth surface. Coarse cut.

6,14 €
12,00 лв.
Out of stock
Add to Compare

Tungsten carbide cutter inverted cone, available for order in two abrasives - medium (blue) and coarse (green).

6,14 €
12,00 лв.
Check Options
Add to Compare

Avialable for order in two abrasives - fine (red) and medium (blue). Recommended speed: 5000 - 40 000 rpm.

6,14 €
12,00 лв.
Check Options
Out of stock
Add to Compare

Spiral cross cut with medium abrasive used for processing chrome-cobalt and chrome-nickel alloys.

6,14 €
12,00 лв.
Out of stock
Out of stock
Add to Compare

For very coarse grinding of all plastics, incl. for the manufacture of individual trays, as well as for the processing of plaster.

6,14 €
12,00 лв.
Out of stock
Out of stock
Add to Compare

They are used for processing soft thermoplastic structures of varying degrees of hardness, providing an even and smooth polished surface.

6,14 €
12,00 лв.
Out of stock
Sale!
Out of stock
Add to Compare

Fine plain cut for finishing of metals, gold and acrylics.

6,14 €
12,00 лв.
Out of stock
Add to Compare

Available for order in two abrasives - fine (red) and medium (blue). Cross cut for micromotor. Also for use in clinic with straight handpiece.

6,14 €
12,00 лв.
Check Options
Add to Compare

Available for order in two abrasive levels - medium (blue) and super coarse (black). Medium -  for grinding of nickel-chrome, cobalt-chrome and other alloys. Super coarse - for coarse grinding of acrylics and for plaster.

6,14 €
12,00 лв.
Check Options
Out of stock
Add to Compare

Tungsten carbide cutter, medium abrasive. They are used for fast processing of chrome-cobalt, chrome-nickel and other types of alloys. They have high wear resistance.

6,14 €
12,00 лв.
Out of stock
Out of stock
Add to Compare

Medium abrasive. They are used for fast processing of chrome-cobalt, chrome-nickel and other types of alloys. They have high wear resistance. Used with micromotor and straight handpiece in clinic.

6,14 €
12,00 лв.
Out of stock
Out of stock
Add to Compare

For precious metal alloys, cermet and titanium. Spiral cut and fine, sharp edges enables optimum material reduction.

6,14 €
12,00 лв.
Out of stock
Out of stock
Add to Compare

Tungsten carbide cutter with spiral cross cut for chrome-nickel and chrome-cobalt alloys.

6,14 €
12,00 лв.
Out of stock
Out of stock
Add to Compare

Tungsten carbide cutter for finishing of precious metal alloys, chromium-nickel alloys, steel, as well as for fast rough processing of ceramics, shaping and contouring.

6,14 €
12,00 лв.
Out of stock
Add to Compare

Tungsten carbide big flame for straight handpiece available in different abrasives for order.

6,14 €
12,00 лв.
Check Options
Out of stock
Add to Compare

Fine cutter used for the finishing of precious metal alloys, chromium-nickel alloys, steel, as well as for fast rough processing of ceramics, shaping and contouring.

6,14 €
12,00 лв.
Out of stock
Out of stock
Add to Compare

It is used for processing chrome-cobalt and chrome-nickel alloys. Recommended speed: 15 000 - 30 000 rpm.

6,14 €
12,00 лв.
Out of stock
Add to Compare

Available in different sizes of the working part. For fissure preparation.

2,17 € 2,56 € -15%
4,25 лв.
Check Options

Online only

Add to Compare

Available in different sizes of working parts.

2,72 € 3,20 € -15%
5,32 лв.
Check Options

Online only

Add to Compare

For handpiece. Available in different sizes of working part.

2,72 € 3,20 € -15%
5,32 лв.
Check Options

Online only

Add to Compare

Available in different sizes of the working part.

2,72 € 3,20 € -15%
5,32 лв.
Check Options

Online only

Add to cart
Add to Compare

Coarse cutter cone with criss cross toothing - green, for acrylics and plaster

20,40 € 24,00 € -15%
39,90 лв.
in stock

Online only

Add to cart
Add to Compare

Medium coarse carbide cutter, needle end cone with criss cross toothing. For acrylics, plaster and alloys.

15,21 € 17,90 € -15%
29,75 лв.
in stock

Online only

Add to cart
Add to Compare

Medium coarse carbide cutter, flame with criss cross toothing. For acrylics, plaster and alloys.

9,13 € 10,74 € -15%
17,85 лв.
in stock

Online only

Showing 1 - 36 of 93 items