Set standard labial arches - 10 pieces. Available in 10 different lengths.

Available in three expansion sizes - 8 ; 11 and 13 mm. This is optimized CAD-CAM expander.  Perfect oriented coupling with the digitally designed and SLM manufactured framework, thus assuring an optimal laser welding process.

A device consisting of two components to easily apply torque to a portion of arch wire in proximity of a specific bracket.

Heat-treatable chromium cobalt alloy, stainless and tough. Its tensile strength allows clasps, even difficult ones to be easily shaped, without breakage. Roll 70 g.

Cone and concave beak pliers in stainless steel with tungsten carbide inserts designed to make loops, omegaloops and distal stops in round and rectangular wires.

Thanks to the fan-type handle, allows to manually screw and unscrew the TADs. For both models mini implants.

Used for treatment of maxillary insufficiencies, prognathism of the mandible and cleft palate. The reverse orthopaedic pull between maxilla and mandible facilitates the subsequent orthodontic treatment.

Reinforced POP (perfect orthodontic performance) screw foe lower arch. Avilable in different colors. Expansion 9 mm, body 14 mm.

Discs and square plates featuring one soft and one hard side. The soft side is made of EVA (Ethylene Vinyl Acetate) and the hard side is made of PET-G (Polyethylene Terephthalate modified with Glycol). Available in different thicjness.

Square plates featuring one soft and one hard side. The soft side is made of EVA (Ethylene Vinyl Acetate) and the hard side is made of PET-G (Polyethylene Terephthalate modified with Glycol). Available in different thicjness.

Reinforced POP (perfect orthodontic performance) screw foe lower arch. Avilable in different colors. Expansion 8 mm, body 12 mm.

Fixing cylinder for TAD mini implant head. Connection to the framework.

Fixing screw for mini implant head for biphasic TAD bone borne device. Connection the frame to the mini implant.

Adapter for TAD and TAD integral mini implants for contra angle. Avialbale in short and long shaft.

Mini implants Ø 2 mm with an internal thread in the head for a fixing screw. Available in 4 length sizes. To fabricate a maxillary expander appliance TAD with a temporary skeletal anchorage in two steps.

Intended for unilateral distalization and expansion of upper molars. Available with 3 or 4 arms. Featuring one guide only and expansion capacity up to 11 mm.

Available in 4 expansion sizes - 8; 9; 11 and 13 mm. Instead of the arms, it has four transversal housings with an ending stop on the bodies that allow a perfect oriented coupling with the digitally designed and SLM manufactured framework. STL File

Available for order in 2 expansion sizes - 8 and 11 mm. The CAD-CAM expander for lower arch Tooth Borne is the optimized CADCAM version of the Torko lower screw. Instead of the arms, it has two transversal housings with an ending stop on the bodies that allow a perfect oriented coupling with the digitally designed and SLM manufactured framework, thus assuring an...

Available in five outer diameter sizes - (1 - 83 mm), (2 - 90 mm), (3 - 97 mm), (4 - 104 mm) and (5 - 111 mm).

Extraoral facebow in several sizes of the outer diameter - (3 - 97 mm) and (4 - 104 mm).

It is device optimized for the CAD-CAM procedure: instead of the arms, features 2 squared slots that allow a correct oriented coupling for the welding of digitally designed customized laser melted framework. Available in three expansion dimensions - 8, 10 and 12 mm. <a href="https://leone.it/english/services/3d-resources/" target="_blank" class="btn btn-default" rel="noreferrer...

Rapid expander optimized for construction with CAD-CAM procedure. Available in several sizes for expansion. Patient instructions to facilitate endoral activation at home. Plus a .stl file available on the Leone website and included in the 3D Leone Designer software library. <a href="https://leone.it/english/services/3d-resources/" target="_blank" class="btn btn-default"...

Built in thermo- and manometer. For pressure polymerization of orthodontic cold-curing acrylic. This type of polymerization allows evaporation of the monomer and condensation of acrylic, which will fit perfectly on the plaster model. The plates come out perfectly finished and can be polished immediately. Use with Press T1311-00.