Available in five outer diameter sizes - (1 - 83 mm), (2 - 90 mm), (3 - 97 mm), (4 - 104 mm) and (5 - 111 mm).

Extraoral facebow in several sizes of the outer diameter - (3 - 97 mm) and (4 - 104 mm).

Holding archwires by its specifications, easy to recognize and take out. Two sections for upper and lower archwires, each 6 pieces. marked sizes: 012, 014, 016, 017, 018, 019.

Holding archwires by its specifications, easy to recognize and take out. Two sections for upper and lower archwires, each 6 pieces. marked sizes: 16x16, 16x22, 17x25, 18x25, 19x25, 21x25.

Made of a chemically inert material, anti-adhesive, non porous, with a very low friction coefficient. Slightly thermo retractile when heated at 150°C. For wires 0,7 mm (.028”) up to 0,8 mm (.031”) in diameter. Roll of 5 m.

Available for order in 4 variants - short, long or extra long outer arch, with or without extra hooks. Made entirely of biomedical stainless steel wire, 1,80 mm in diameter, with single piece inner bow, 1,14 mm (.045”) in diameter. Breakage resistant laser welded bow and bite joints, 0,5 mm thick, with total absence of solder, to prevent from eventual allergic reactions due to the presence...

For marking arch wires, bite planes, etc.

Standard holder for orthodontic archwires.

Straight flex 6-core wire for retainers and fixation. Available in three thickness options - 015", 0175" and 0195'. Single rod with approx. length - 35 cm.

Straight twist triple wire for retainers and fixation. Available in four thickness options - 015", 0175", 0195' and 0215". Single rod with approx. length - 35 cm.

Available in 4 length distances between the hooks - 24, 26, 28 и 30 mm.

Memoria open coil spring from nickel titanium for extraoral lip bumper. Inside diameter of the spring - 045". Length - 18 cm.

Straight wire (35 cm) in a titanium molybdenum alloy, they feature high elasticity and good bendability with pliers. Available in three...

Available for upper and lower jaw for order. Standard preformed. Made out of extra spring hard wire for higher resiliency. Marked at the...

Availble in three profile sizes - 014" x 025", 016" x 025" and 017" x 025" either for upper and lower arch. Made of special superelastic nickel-titanium, they release a specifically calibrated force range for use with F1000 self-ligating brackets.

Available for order in two diameters - 014" and 016" both for upper and lower jaw.

Available in two forms - medium and large either in two diameter sizes - 012" and 014". Made of a special Nickel Titanium alloy allowing light adaptations necessary in case of treatment extension to first bicuspids, thus keeping high elasticity.

No nickel, beta-memoria lingual archwire, available in two forms - medium and large. Ideal to optimize the alignment and levelling values.

Available for upper and lower jaw for order. Standard preformed. Made out of extra spring hard wire for higher resiliency. Marked at the midline, black for upper and red for lower.

The set includes all sizes of the palatal bars - from 34, 36 ... up to 52 mm, 5 pieces each size.

Available in 10 length sizes - from 34; 36 .. up to 52 mm. Palatal bars allow controllable movements of rotation, expansion and contraction of upper first molars. Made of heat-treated wire, 0,9 mm in diameter, to increase their tensile strength, they are easy to remove from the tubes for activation.

Available in three force (elasticity) levels: light, medium and heavy. Wire diameter 010"(light), 012"(medium), 014"(heavy). Length of the spring 18 cm.

Closed nickel titanium coil spring available in three force levels: light L 150 g, medium M 200 g and heavy H 250 g. Wound ends for connecting with brackets or tubes.