Available for order in 3 abrasives. 3-step diamond-polishing system for working on all types of ceramic ZrO2 without heat generation. A new binding component as well as the diamonds allow for optimum polishing results, achieved without any polishing paste. Mounted with mandrel.

Available for order in 3 abrasives. 3-step diamond-polishing system for working on all types of ceramic ZrO2 without heat generation. A new binding component as well as the diamonds allow for optimum polishing results, achieved without any polishing paste. Mounted with mandrel.

Adjustments to the palatal and lingual aspects of the denture are completed quickly without using tungsten carbide cutters. Polishers with maximum service life. Available in two abrasive steps - coarse and medium.

Especially suitable for full contour zirconia restorations. Available in two abrasive grits - fine and medium. High diamond concentration fopr more efficiency. Glazing is not necessery. Mounted for straight handpices HP.

Special set for shaping and polishing zirconia restorations. High-performance diamond-saturated polishing rubbers. No glazing required. Pre-shaping with the three diamond-impregnated Diasynt stones.

Especially designed for all types of ceramics and porcelain. Available for order in three step system - fine, medium and coarse grit. The new double lamella Twist form ensures very...

Brass massive mandrel for polishers, India.

Stainless steel mandrel for disc type polishers, available for order in two shanks - handpiece and contra angle.

Mounted for handpiece. Use for polishing of acrylics and orthodontic appliances. Recommended: 5 – 8 000, max: 15 000 rpm.

Mandrel for silicone fissure polishers EVEFLEX PINS, available for diameter sizes: 1, 2, 3 and 4 mm.

Unmounted, available in 4 abrasive steps. For precious and non-precious metal alloys. Recommended: 7 – 15 000, max: 25 000 rpm.

Unmounted for preciuos metals. Recommended: 7 – 10 000, max: 20 000 rpm.

Mounted for handpiece for acrylics, relinings and soft trays. Recommended: 8 – 12 000, max: 20 000 rpm

Unmounted for acrylics, relinings and soft trays. Recommended: 8 – 12 000, max: 20 000 rpm.

Unmounted for chrom-cobalt and non-precious alloys. Recommended: 8 – 15 000, max: 20 000 rpm.

Unmounted for chrom-cobalt and non-precious alloys. Recommended: 8 – 15 000, max: 20 000 rpm

Mounted polisher for handpiece (micromotor) for polishing  of dentures and orthodontic acrylics. Recommended: 5 – 7 000, max: 15 000 rpm. Available in two abrasive steps.

Mounted for handpiece (micromotor).Use for Precious and Non-Precious Metal Alloys. Recommended: 7 – 12 000, max: 20 000 min⁻¹. Available in three abrasive steps.

Mounted for handpiece and micromotor, for porcelain polishing. Recommended speed: 5 – 10 000, max: 20 000 min⁻¹

Mounted for handpiece and micromotor, for porcelain polishing. Recommended speed: 5 – 10 000, max: 20 000 min⁻¹

Unmounted for porcelain polishing. Recommended speed: 7 – 10 000, max: 20 000 min⁻¹.

Unmounted for mandrel 120HP, available in 4 abrasive steps. For precious and non-precious metal alloys. Recommended: 7 – 15 000, max: 25 000 rpm.

Unmounted, available in 4 abrasive steps. For precious and non-precious metal alloys. Recommended: 7 – 15 000, max: 25 000 rpm.