Spacer with inner diameter 1,5 mm. Available in two outside diameters 4,4 and 3,6 mm. Autoclavable.

Elastomeric marking ring for different diameters of the taps - 4 colors.

Organizer with 3 mucosa punch for implants with gingival heights measure. Three diameter sizes 3,3/4,1/4,8 mm.

Kit osteotoms and sinus lift implantology instruments. Includes: 661/88HL8, 661/87HL8, 1309/1, 1309/2, 1309/3, 1307/3RRC, 1307/3RRT, 1307/3BCC, 1307/3B.

Removal plier for abutments with standart prosthetic platform Leone.

It allows the use of the handpiece during the placement of the monoimplants. Supplied non sterile, sterilise in the autoclave before use.

Made of stainless steel and anodized aluminium. With hexagonal hole matching with the monoimplant head. Sidewise presents a hole for the placement of a safety leash. It is necessary for the placement of the monoimplant into the implant site. Supplied non sterile, sterilise in the autoclave before use.

Made of medical grade 5 titanium. 2,2 mm in diameter. With a hole for the placement of a safety leash. Designed to be used during the preparation of the implant site to verify the depth. For monoimplants and implants. Supplied non sterile. Sterilise in the autoclave before use. With marks on 6,5-8-10-12 -14-16-18 mm.

Circular mucosa punch of titanium, 2.7 mm in diameter, to be seated into the contra angle handpiece. It allows to perform an adequate operculum in the flapless procedure. With 3 marks at 3, 5 and 7 mm starting from the bone crest and useful for the measurement of the gingival thickness. Supplied non sterile, sterilise in the autoclave before use.

Made of stainless steel. To unlock the healing cap with either Standard or Large platforms and the low self-locking cap. With a hole for the insertion of a safety leash. Suitable for all types of implants. Supplied non sterile. Sterilise in the autoclave before use. If the hexagon is worn out, replace the instrument.

Made of medical grade 5 titanium. It is used to connect the hand screwdriver or the ratchet with other instruments like tap, carrier etc. The elastomer ring on the octagonal basis allows the connection with the hand instruments. Supplied non sterile. Sterilise in the autoclave before use.

Replace after used more than 50 times.

Dimensions of the two ends: 2.2 mm and 2.8 mm in diameter. With a hole for the placement of a safety leash. Designed to be used during the preparation of the implant site to ascertain parallelism with natural teeth and/or with adjacent implant sites. For monoimplants and implants. Supplied non sterile. Sterilise in the autoclave before use.

Made of medical grade 5 titanium. Designed for use with the tap to create a thread in the implant site and afterwards to screw the implant into the bone. It fits over the tap or the implant carrier and it can be used with the specially provided extension. With a hole for the placement of a safety leash. Supplied non sterile. Sterilise in the autoclave before use.

Available in two steps for sequence - step A and step B. The use of the tap “ A ” is essential with any kind of bone for the...

Available in three diameter sizes depending on the intended implant - D 3.3 mm, D4.1 mm and D 4.8 mm, as also two length sizes - short 21 and long 28 mm. Made of stainless steel. Designed for the preparation of the implant site with high bone density. The elastomer ring on the octagonal basis allows the connection with the instruments.

Available in three steps (diameters) for choice - 2,2 mm, 2,8 mm and 3,5 mm. With integrated depth stop at 6.5 mm. The 3,5 mm twist drill has got the crestal countersink integrated. These drills are used in progression to allow the widening of the...

Available in four colors for four different diameter sizes - blue ( ø 2,2mm), green ( ø 2,8mm), yellow ( ø 3,5 mm) and red (<span...

Available in three sizes depending on the implant intended for - D3.3 mm, D 4.1 mm and D...

Available in two different lengths - 33 and 39 mm, also in 3 diameter sizes (for each size implant) - Ø 2.8 ; Ø 3.5 and Ø 4.2 mm. The 5 depth marks on the drill corresponding to the implant lengths (6,5-8-10-12-14 mm) enable the clinician to reach the relevant depth.  

Available in two length sizes - 33 and 39 mm. Indicated to drill the implant site. The 5 depth marks on the drill corresponding to the implant lengths (6,5-8-10-12-14 mm) enable the clinician to reach the relevant depth. Max speed: 800 rpm.

Designed to mark the cortical bone for the subsequent drills. Diameter Ø 1,9 mm, length 34 mm.

Includes all necessery instruments for work with leone implant system. The twist drills, tapings, pilot drills, countersinks for every size implant are available in two length sizes - short and long.