Implant Instruments
This category includes - mucotome, osteotomy, Instruments for implant and abutment, templates, ratchet.

Implant Instruments 

There are 56 products.
per page
Add to cart
Add to Compare

Organizer with 3 mucosa punch for implants with gingival heights measure. Three diameter sizes 3,3/4,1/4,8 mm.

95,61 €
187,00 лв.
backorder
Add to Compare

Elastomeric marking ring for different diameters of the taps - 4 colors.

3,73 €
7,30 лв.
Check Options
Add to Compare

Spacer with inner diameter 1,5 mm. Available in two outside diameters 4,4 and 3,6 mm. Autoclavable.

12,78 €
25,00 лв.
Check Options
Add to cart
Add to Compare

Kit osteotoms and sinus lift implantology instruments. Includes: 661/88HL8, 661/87HL8, 1309/1, 1309/2, 1309/3, 1307/3RRC, 1307/3RRT, 1307/3BCC, 1307/3B.

367,11 €
718,00 лв.
backorder
Add to Compare

Available in three sizes depending on the implant intended for - D3.3 mm, D 4.1 mm and D 4.8 mm. Supplied non sterile. sterilize in autoclave before use.

54,71 €
107,00 лв.
Check Options
Add to cart
Add to Compare

13,80 €
27,00 лв.
in stock
Add to cart
Add to Compare

Manufactured in stainless steel. It is used for screwing and unscrewing the tips into the threaded handle.

20,25 €
39,60 лв.
in stock
Add to cart
Add to Compare

Made of stainless steel. Allows to extend the total length of the drill. Supplied non-sterile, sterilise in autoclave before use.

39,37 €
77,00 лв.
in stock
Add to cart
Add to Compare

Do not use with a torque value higher than 50 Ncm. Made in tempered stainless steel.

20,25 €
39,60 лв.
in stock
Add to cart
Add to Compare

Made of medical grade 5 titanium. 2,2 mm in diameter. With a hole for the placement of a safety leash. It is used to measure the height of the soft tissues and ascertain parallelism, during the preparation of the implant site, immediately after the application of the pilot drill. For monoimplants and implants. Marks at 3-5-7 mm. 

11,25 €
22,00 лв.
backorder
Add to Compare

Available in two shapes - straight tip and offset tip. Made of stainless steel and medical grade 5 titanium. Supplied with an inner spring, it provides the right beating force to engage the healing cap and definitely connect the abutment to the implant. Every seating tip may be mounted on the abutment beater.

129,36 €
253,00 лв.
Check Options
Add to cart
Add to Compare

Designed to sterilize and hold the instruments necessary for the planned intervention on the operating table. Includes: 1 round bur, 1 pilot drill, 1 mucosa punch for handpiece, 1 depth gauge Ø 2.2 mm, 1 fan-type wrench for monoimplants, 2 measuring pin for gingival height, 1 adapter for handpiece.

200,94 €
393,00 лв.
in stock
Add to cart
Add to Compare

Includes: round bur, pilot drill, twist drill ø 2.8 mm, countersink ø 3.3 mm, drill for hard bone imp. ø 3.75 mm, handpiece adapter, driver for implant.  

306,78 €
600,00 лв.
in stock
Add to cart
Add to Compare

The template helps the surgeon in selecting the right implant to be inserted. The whole range of LEONE implants in three scales is illustrated: actual dimensions, dimensions increased by 10% and dimensions increased by 25%, it takes into account the distortions due to the diagnostic instruments. Pack of 1.

19,17 €
37,50 лв.
in stock
Add to cart
Add to Compare

The template helps the surgeon in selecting the right implant to be inserted. The whole range of LEONE implants in three scales is illustrated: actual dimensions, dimensions increased by 10% and dimensions increased by 25%, it takes into account the distortions due to the diagnostic instruments. Pack of 1.

19,17 €
37,50 лв.
in stock
Add to cart
Add to Compare

The template helps the surgeon in selecting the right implant to be inserted. The whole range of LEONE implants in three scales is illustrated: actual dimensions, dimensions increased by 10% and dimensions increased by 25%, it takes into account the distortions due to the diagnostic instruments. Pack of 1.

19,17 €
37,50 лв.
in stock
Add to cart
Add to Compare

The template helps the surgeon in selecting the right implant to be inserted. The whole range of LEONE implants in three scales is illustrated: actual dimensions, dimensions increased by 10% and dimensions increased by 25%, it takes into account the distortions due to the diagnostic instruments. Pack of 1.

19,17 €
37,50 лв.
in stock
Add to cart
Add to Compare

Includes the following instruments: extension, hand screwdriver large, hex-head extractor, instrument for cover caps, hand piece adapter, depth gauge, paralleling pin and driver for implant.

119,13 €
233,00 лв.
backorder
Add to cart
Add to Compare

Made of stainless steel. Seating tip is screwed into the threaded handle to beat the abutment for the definitive connection to the implant. Suitable also for surgical tips. Supplied non-sterile, sterilise in the autoclave before use.

50,62 €
99,00 лв.
in stock
Add to cart
Add to Compare

Made of anodized aluminium. Designed to be used during the preparation of the implant site, it allows the right placement of the depth indicator on the drills. Supplied non sterile, sterilize in autoclave before use. Pack content: 1 positioner and 4 packs depth indicators (one for each diameter available).

67,49 €
132,00 лв.
in stock
Add to Compare

Available in three shapes - straight, offset and flat. Made of medical grade 5 titanium. Designed to be screwed onto the threaded handle or the abutment beater. The flat tip is most suitable for the angled abutments. Suitable for all the abutments and healing caps.

28,12 €
55,00 лв.
Check Options
Add to cart
Add to Compare

56,24 €
110,00 лв.
in stock
Add to cart
Add to Compare

2,81 €
5,50 лв.
in stock
Add to cart
Add to Compare

Made of stainless steel. By screwing it into the threaded handle, the execution of special surgical techniques is allowed in difficult access areas with sinus lift tips. Supplied non sterile. Sterilise in the autoclave before use.

28,12 €
55,00 лв.
in stock
Add to cart
Add to Compare

The ratchet is designed to be used with the tap to thread the implant site and being a two-way instrument, it may be utilized whether to screw in or unscrew implants. With circular revolution in 24 “releases”, this ratchet is a specific versatile device even in small spaces where a “reload” of the instrument is needed.

134,98 €
264,00 лв.
in stock
Add to Compare

Available in thre sizes depending on the abutment connection diameter - D 3.3 mm, D 4.1 mm and D 4.8 mm. Made of medical grade 5 titanium. It is used for the milling of the abutment either in the laboratory or in the dental office.

67,49 €
132,00 лв.
Check Options
Add to cart
Add to Compare

Includes all necessery instruments for work with leone implant system. The twist drills, tapings, pilot drills, countersinks for every size implant are available in two length sizes - short and long. 

2 130,04 €
4 166,00 лв.
in stock
Add to cart
Add to Compare

Designed to mark the cortical bone for the subsequent drills. Diameter Ø1,9 mm, length 34 mm.

16,87 €
33,00 лв.
in stock
Add to Compare

Available in two length sizes - 33 and 39 mm. Indicated to drill the implant site. The 5 depth marks on the drill corresponding to the implant lengths (6,5-8-10-12-14 mm) enable the clinician to reach the relevant depth. Max speed: 800 rpm.

50,62 €
99,00 лв.
Check Options
Add to Compare

Available in two different lengths - 33 and 39 mm, also in 3 diameter sizes (for each size implant) - Ø 2.8 ; Ø 3.5 and Ø 4.2 mm. The 5 depth marks on the drill corresponding to the implant lengths (6,5-8-10-12-14 mm) enable the clinician to reach the relevant depth.  

67,49 €
132,00 лв.
Check Options
Add to Compare

Available in three sizes depending on the implant intended for - D3.3 mm, D 4.1 mm and D 4.8 mm. Supplied non sterile. Sterilize in autoclave before use. Suitable to shape the osteotomy for the implant neck at the end of the surgical sequence. Thanks to its self-centering multi-blade geometry, it performs a perfectly coaxial and precise countersinking...

73,11 €
143,00 лв.
Check Options
Add to Compare

Available in four colors for four different diameter sizes - blue (ø 2,2mm), green (ø 2,8mm), yellow (ø 3,5 mm) and red (ø 4,2 mm). The elastomer ringlets are to be applied on the drill to visualize better drilling depth. Supplied non sterile, sterilize in autoclave before use.

6,75 €
13,20 лв.
Check Options
Add to Compare

Available in three steps (diameters) for choice - 2,2 mm, 2,8 mm and 3,5 mm. With integrated depth stop at 6.5 mm. The 3,5 mm twist drill has got the crestal countersink integrated. These drills are used in progression to allow the widening of the implant site up to the LEONE 6.5 short implant diameter.

50,62 €
99,00 лв.
Check Options
Add to Compare

Available in three diameter sizes depending on the intended implant - D 3.3 mm, D4.1 mm and D 4.8 mm, as also two length sizes - short 21 and long 28 mm. Made of stainless steel. Designed for the preparation of the implant site with high bone density. The elastomer ring on the octagonal basis allows the connection with the instruments.

63,91 €
125,00 лв.
Check Options
Add to Compare

Available in two steps for sequence - step A and step B. The use of the tap “A” is essential with any kind of bone for the placement of the short implant 6.5. The bone tap “B” is suitable with high bone density and essential to be used after tapping with bone tap “A”.

63,91 €
125,00 лв.
Check Options
Add to cart
Add to Compare

Made of medical grade 5 titanium. Designed for use with the tap to create a thread in the implant site and afterwards to screw the implant into the bone. It fits over the tap or the implant carrier and it can be used with the specially provided extension. With a hole for the placement of a safety leash. Supplied non sterile. Sterilise in the autoclave...

25,00 €
48,90 лв.
in stock
Showing 1 - 36 of 56 items